Need help?Do you have a question about the Multitech Conduit MTCDT-L4E1 and is the answer not in the manual?
General| Model | MTCDT-L4E1 |
|---|---|
| Category | Gateway |
| Manufacturer | Multitech |
| Ethernet Ports | 1 |
| Serial Ports | 1 |
| USB Ports | 1 |
| Cellular | 4G LTE |
| GPS | Yes |
| Connectivity | Ethernet, Cellular, LoRa |
| Ethernet | 10/100 Mbps |
| Wi-Fi | 802.11 b/g/n |
| Operating Temperature | -30°C to +70°C |
Detailed technical specifications for the MTCDT-L4E1 model, including performance and environment.
Explanation of each connector on the back panel, including CELL, AUX, AP1/AP2, USB, and E-NET.
Explanation of the status LEDs on the front panel and Ethernet port for device status.
Measured current and inrush charge data for different radio protocols and voltages.
Step-by-step guide to install and connect the Conduit hardware components.
Detailed procedure for installing or replacing the Mini SIM card in the device.
Description of interface options available on the mCard accessory ports.
Procedure for installing or replacing the Micro SD memory card.
Procedure for installing or replacing the internal lithium battery for timekeeping.
Guide to connecting the device to a host computer for debugging via USB.
Instructions on how to restore user-defined settings using the reset button.
How to reset the device to factory defaults or reboot it for AEP and mLinux.
Steps to properly power on the Conduit device after installation.
Information and cautions regarding the internal backup lithium battery.
To Next Page
