PRODUCT OVERVIEW
Ethernet LED Descriptions
Two Ethernet LEDs are physically on the RJ-45 connector(s). The table that follows describes these LEDs.
Ethernet Link Right LED on Ethernet connector. Blinks when there is transmit and
receive activity on the Ethernet link. It shows a steady light when
there is a valid Ethernet connection.
Ethernet Speed Left LED on Ethernet connector. Lit when the Ethernet is linked at 100
Mbps. If it is not lit, the Ethernet is linked at 10 Mbps.
Specifications
MTR-H5
Category Description
General
Performance HSPA+
GPRS/EDGE
Frequency Bands Tri-Band 850/900/2100 MHz
Quad Band 850/900/1800/1900 MHz
Radio
Cellular Telit HE910-D
Wi-Fi, Bluetooth Murata LBEE5ZSTNC-523
Speed
MultiConnect
®
rCell 100 Series Router User Guide 9