Why is my multivac Laboratory Equipment machine very loud?
If your Multivac laboratory equipment is making excessive noise, it could be due to a clogged air de-oiling element, which requires replacement. Alternatively, the vacuum pump may be defective, in which case you should notify the service.
What to do if multivac Laboratory Equipment machine does not run?
If your Multivac laboratory equipment isn't starting, first ensure that the machine is switched on. Also, check if the mains plug is properly plugged in. Lastly, ensure the ambient temperature is within the permissible range as specified in the Technical Specifications.
Why is the seal seam uneven and wavy on my multivac C250 Laboratory Equipment?
An uneven and wavy seal seam on your Multivac laboratory equipment often results from an insufficient pressure difference between the chamber and the outside environment during sealing. To resolve this, reduce the Evacuation pressure value, Gas flushing pressure value, and Gas flushing time value. Also, check if the sealing bar is damaged and replace it if necessary.
What to do if oil leaks out of multivac C250 Laboratory Equipment machine?
If oil is leaking from your Multivac laboratory equipment, check whether the screw plugs or oil sight glass are not tight and tighten them. If the problem persists, the vacuum pump may be defective, and you should notify the service.
Why is there odour or smoke coming from my multivac C250?
If you notice an odor or smoke coming from your Multivac laboratory equipment, the air de-oiling element may be defective and needs to be changed. Alternatively, the oil return valve of the vacuum pump may be clogged, which requires you to notify the service.
How to fix poor vacuum in the pack with multivac Laboratory Equipment?
If you're experiencing a poor vacuum in the pack with your Multivac laboratory equipment, it may be due to the evacuation pressure being set too high. Try reducing the evacuation pressure value to improve the vacuum.
Why is there high oil consumption in my multivac C250?
High oil consumption in your Multivac laboratory equipment is often due to a clogged air de-oiling element. Consider changing the air de-oiling element.
What to do if chamber lid does not remain closed despite pump running on multivac C250 Laboratory Equipment?
If the chamber lid on your Multivac laboratory equipment doesn't stay closed while the pump is running, ensure you press the chamber lid shut more evenly, firmly, and for a longer duration. Also, check if the chamber lid gasket is dirty and clean it. If the issue continues, the chamber lid gasket may be damaged and needs to be changed.
What to do if the excess pouch neck can only be severed with difficulty at the sever seal or it can not be severed at all on multivac Laboratory Equipment?
If you're having trouble severing the excess pouch neck on your Multivac laboratory equipment, the sealing time may be set incorrectly. Increase the value for sealing time in small increments.
Why is seal seam milky on multivac C250?
A milky seal seam on your Multivac laboratory equipment indicates that the sealing time is set incorrectly. Reduce the sealing time value until the seal seam becomes clear and transparent.
Provides fundamental safety guidelines for machine operation and personnel.
Warns against using non-genuine parts and performing unauthorized modifications.
Details operator responsibilities for safety, personnel, and operations.
Instructions for connecting the machine to power and inert gas.
Details switching the machine on and off, including self-tests.
Guides on packing products, using recipes, and setting up processes.
Details procedures for daily and intensive cleaning, including component handling.
Presents a schedule of required maintenance tasks based on frequency.
Provides specific guidance for visual inspections, tests, and checks.
Covers vacuum testing, sealing bar replacement, and oil changes.
Lists common malfunctions with diagnostic codes and their solutions.
Details common faults without codes and their troubleshooting steps.
General| Brand | multivac |
|---|---|
| Model | C250 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
