Safety
Obligations of the operating company
20 10.06.2014
1.7.13 Testing pressure equipment
The operating company is responsible for observing the country-
specific test intervals for pressure equipment. This test is to be per-
formed by qualified persons.
1.8 Safety devices
Safety devices on the machine:
Fig. 2: Safety devices
1
Protective device
WARNING
Injury hazard!
Altered, damaged, defective or incorrectly applied or missing safety
devices will render the danger zones unprotected.
Unprotected danger zones can cause serious or even fatal injuries.
¾ Do NOT alter the safety devices.
¾ Use only MULTIVAC spare parts and accessories.
Before switching on the machine each time:
¾ Check that all safety guards close completely and prevent
reaching into the danger zones.
¾ Check that only those safety devices are used which are suit-
able for the machine equipment.
¾ Check that all safety devices are functional and in a technically
flawless condition.
To Next Page
Loading...
