Cleaning
Cleaning the machine
10.06.2014 63
6.2.2 Performing intensive cleaning
Info
• Intensive cleaning complements daily cleaning. As part of this
process additional cleaning measures are required depending on
the degree of contamination of the components described in this
chapter.
• The intensive cleaning may only be performed by specially
trained personnel. Information on qualifications and training can
be obtained from our service personnel.
• The sequence of the described tasks is to be followed exactly.
• Always clean the machine from top to bottom.
• In the following, optional equipment versions are also described.
Only perform steps that correspond to the version of the ma-
chine.
• For all cleaning work, follow the safety instructions, see Section
6.1 "N
OTES ON CLEANING".
• The illustrations are examples.
¾ Remove chamber lid gasket from the groove.
¾ Perform daily cleaning, see Section 6.2.1 "PERFORMING DAILY
CLEANING ".
¾ Clean and disinfect the chamber lid gasket together with the
removed components.
To Next Page
Loading...
