Cleaning
Cleaning the machine
62 10.06.2014
¾ Attach the following components:
– Insertable counter-pressure bar.
– Sealing bars
– Spacer plates.
– Diagonal insert with support bracket.
¾ Disinfect the entire loading area with alcohol-based disinfectant.
¾ Leave the chamber lid open to dry.
¾ If present, open the stop valve for the gas supply.
¾ Connect the machine to the mains electricity.
¾ Clean cleaning implements (e.g. rubber wipers, brushes).
¾ Place cleaning implements in disinfectant solution-
¾ Unpack the film pouches and lay them ready.
To Next Page
Loading...
