EasyManua.ls Logo

multivac C250 - Page 61

multivac C250
95 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning
Cleaning the machine
10.06.2014 61
¾ If necessary, clean and wipe off again.
Disinfect the machine
and the floor.
NOTICE Danger of material damage!
Penetration by foreign matter (e.g. liquids, product residue, foreign
bodies) will damage the vacuum pump.
Damage can cause faults in the machine, which in turn can result in
reject packs.
¾ Do NOT spray directly on the covers of the suction openings in
the chamber.
¾ Disinfect entire machine, including table, with alcohol-based disin-
fectant.
¾ Close chamber lid and lock it in place.
¾ Use a hand-held spray lance to apply disinfectant to the floor.
¾ Wait until the contact time has elapsed (see instructions of disin-
fectant manufacturer).
¾ If necessary, rinse the floor with water of drinking quality; see in-
structions of the disinfectant manufacturer.
Complete cleaning
¾ Remove the plastic bag from the mains plug.
¾ Dispose of plastic bags properly. For reasons of hygiene, never
reuse bags

Table of Contents

Related product manuals