Operation
Packing products
10.06.2014 43
¾ If necessary, use spacer plates.
– The pouch neck is centred on the pouch height x.
¾ Use the diagonal insert for packaging liquids, see Section 5.1
"INSERT AND REMOVE THE SLOPING INSERT ".
– Liquid cannot escape from the film pouch.
¾ Gas flushing option: Pull the pouch opening over the gas noz-
zles so that the inert gas flows into the film pouch.
¾ Pull the pouch neck flat on the sealing bar.
– The pouch neck lies on the sealing bar without creases.
To Next Page
Loading...
