13
Support: +1 650 206 2250
14
Support: +1 650 206 2250
Before repair, please check the problems below.
NOTE: Before troubleshooting, please turn off the power switch and
unplug the outlet.
Turn it clockwise to decrease gap in order to add friction (tight).
Turn it anticlockwise to increase gap in order to reduce friction (loose).
Figure 6-1 Adjustable Screw
Check if the plug is well inserted
into socket
Check if the power fails or fuse burn out
Feeding Sensor covered in dust? Clean
Figure 6-2 Feeding Gap Adjustment with One Banknote
6.4. Common Trouble and Solution
Adjustable
Screw
Not working
Fail to start or stop normally
Hopper position adjusted improperly?
Counting Error
To Next Page
Loading...
