Page16 of 21
ITPP047 Thermal Printer Hardware Manual
Version 1.00
2.3. Turning on the Power
Make sure that the power cord has been connected as described in 2.1.2.
(1) Turn on the power switch located on the front of the printer.
The power lamp on the control panel will light up.
Figure 2- 3 Power Switch
CAUTION
We recommend that you unplug the printer from the power outlet whenever you do not plan to use it for
long periods. Because of this, you should locate the printer so that the power outlet it is plugged into is
nearby and easy to access.
To Next Page
Loading...
