8 | © Munters AB, 2019
2.4 Residual risks
Part of machine/stage of use
Hazard arising from failure to observe
ergonomic principles, caused by
excessive strain, i.e. generic
mechanical hazard during the moving
and installing stages of the machine.
Panels, covers and electrical
apparatus.
The safety signs must be fixed in an
extremely visible position on the door of
the electrical panel and on covers
containing electrical apparatus, to
highlight the risks to which an operator
could be exposed in the event of
opening the electrical panel (danger
resulting from the presence of live
parts), the level of voltage present, the
prohibition of tampering by
unauthorized personnel and the
prohibition on the use of liquids on
electrical apparatus in the event of fire.
Hazards generated by noise
(measured at 2m distance)
Sound pressure level Lp [dB(A)]
WARNING
The user and the employer must comply with current national law in terms of protection against
daily personal exposure of operators to noise, by providing the use of personal protective equipment (earmuffs,
earplugs, etc.) if necessary, depending on the overall level of sound pressure in the installation area, and the daily
personal exposure of the employees. In areas where the overall sound level reaches excessive values, personal protective
equipment must be used.
WARNING
The fan must only be used if it is in perfect operating condition, by personnel, aged more than 14
years who are perfectly aware of the safety measures and possible hazards, and in strict compliance with the
instructions given in this manual.