Troubleshooting_71
For the DADF
(CLX-6200ND, CLX-6210FX, CLX-6240FX only)
1. Remove any remaining pages from the DADF.
2. Open the DADF cover.
3. Pull the jammed paper gently out of the DADF.
4. Close the DADF cover. Then load the removed pages, if any, back
into the DADF.
Exit misfeed
1. Remove any remaining pages from the DADF.
2. Seize the misfeed paper, and remove the paper from the document
output tray by carefully pulling it to the right using both hands.
3. Load the removed pages back into the DADF.
Roller misfeed
1. Open the scanner lid.
2. Seize the misfeed paper, and remove the paper from the feed area by
carefully pulling it to the right using both hands.
3. Close the scanner lid. Then load the removed pages back into the DADF.
.
1 DADF cover
This illustration may differ from your machine depending on its
model.
To prevent document jams, use the scanner glass for thick, thin, or
mixed paper-type originals.
To Next Page
Loading...
Need help?
General
