22
Cutting Attachment Maintenance
Inspect Trimmer Line Head
Ensure the nylon line is only sticking out of the metal
grommets on the side of the cutting head. If the line has
come off the spool, proceed to Installing Trimmer Line in
the Assembly Section to replace the trimmer line.
Examine the entire head area, including the debris shield,
and clear or clean it free from dirt, debris, loose string,
wire, or any other foreign material.
Inspect Brushcutter Blade
Before each use, check the blade for wear and damage, and
check the tightness of the securing nut. Examine the entire
head area, including the debris shield, and clear or clean
it free from dirt, debris, loose string, wire, or any other
foreign material.
Any blade that is worn out, bent, cracked, chipped, or
damaged in any other way, must be replaced.
WARNING A worn, damaged, or cracked blade
can break, and pieces of the damaged blade can become
dangerous projectiles. A dull blade is more likely to snag and
thrust (kickback). Inspect the blade regularly, and do not
operate the trimmer with a dull, damaged, or worn blade.
MAINTENANCE
To Next Page
Loading...
