To Next Page
T
Timothy McdowellSep 6, 2025
What does 'NearFullWasteInkTank' mean on my MUTOH ValueJet VJ-1204 Printer and what should I do?
- EellisjonSep 6, 2025
If your MUTOH Printer displays 'NearFullWasteInkTank', replace the waste fluid box.
What does 'NearFullWasteInkTank' mean on my MUTOH ValueJet VJ-1204 Printer and what should I do?
If your MUTOH Printer displays 'NearFullWasteInkTank', replace the waste fluid box.
What to do if my MUTOH ValueJet VJ-1204 shows 'End Of Roll'?
If your MUTOH Printer displays 'End Of Roll', load a new roll media.
What to do if my MUTOH ValueJet VJ-1204 shows '[****] InkNearEnd'?
If your MUTOH Printer displays the message '[****] InkNearEnd', prepare a new ink cartridge.
What to do if ink does not come out after ink replenishment in MUTOH ValueJet VJ-1204 Printer?
If ink does not come out after ink replenishment in your MUTOH Printer, try the following: * If the ink cartridge is cold and frozen, leave it at room temperature for at least 3 hours, and perform cleaning several times. * If the power was turned OFF during ink replenishment, turn the power ON again and continue ink replenishment. * If normal printing cannot be performed after ink replenishment, perform cleaning several times, and check it each time.
Why does the media veer during printing with my MUTOH Printer?
If the media veers during printing with your MUTOH Printer, check the following: * Ensure you are using the recommended media. * Verify the media is loaded correctly. * Make sure the scroller is set correctly.
Why is my MUTOH Printer printing partially stained or incomplete?
If your MUTOH Printer is printing partially stained or incomplete images, here are some things to check: * Replace the media if it includes moisture. * If the media bends, use the recommended media or set the Vacuum Fan menu when using other media.
What to do if the wrong media size is set during initialization on my MUTOH ValueJet VJ-1204 Printer?
If the wrong media size is set during initialization on your MUTOH Printer, consider the following: * Use the recommended media. * Load the media straight. * Straighten the media or set a new media if it curls upward when set. * Ensure the printer is used in the specified environment. * Use a new media if you are using media that has been printed on already.
What to do if the media is crumpled during initialization on my MUTOH ValueJet VJ-1204?
If the media is crumpled during initialization of your MUTOH Printer, consider the following: * Use the recommended media. * Set the media correctly. * Load the media straight. * Clean the pressurizing roller to remove any foreign materials. * Ensure the printer is used in the specified environment. * Replace folded, torn, or rolled media.
What to do if the media slips or is torn during initialization on my MUTOH ValueJet VJ-1204 Printer?
If the media slips or tears during initialization of your MUTOH Printer, consider the following: * Use the recommended media. * Set the media correctly. * Set the scroller correctly. * Clean the pressurizing roller to remove any foreign materials. * Ensure the printer is used in the specified environment. * Replace folded, torn, or rolled media. * If the media bends, use the recommended media or set the Vacuum Fan menu.
What to do if my MUTOH Printer does not work after loading the media?
If your MUTOH Printer doesn't work after loading the media, check the following: * Ensure the front cover is closed and the media loading lever is lowered. * Make sure the media is loaded straight. * Verify the ink cartridge is inserted. * Use the recommended media. * Ensure the printer is used in the specified environment, away from direct sunlight.
General