MUTOH ValueJet VJ-628MP User Manual

Operation Manual
Operations and Maintenance Methods
VJ-628MP
• Unauthorized copying or duplication of the whole or part of the contents of this manual is prohibited.
• Every care has been taken in writing the contents of this manual, but please contact MUTOH or the dealer you purchased the
product from if you find any unclear, erroneous or otherwise unsatisfactory content in the manual.
• Please be aware that MUTOH will not be liable in any way for failures or accidents that result from handling or operating the
printer according to any procedures other than those set forth in this manual.
• Company names and product names that appear in this manual are registered trademarks of the respective companies.

MUTOH ValueJet VJ-628MP Specifications

General

Ink Colors	CMYK
Print Technology	Inkjet
Media Handling	Roll feed
Media Thickness	Up to 1.5 mm
Connectivity	USB, Ethernet
Power Requirements	AC 100-240V, 50/60Hz
Operating Environment	15°C to 30°C

Summary

Chapter 1 Basic Operations

Introduction

Overview of the printer's basic functions, parts, and system configurations.

Powering ON/OFF

Detailed steps for turning the printer power on and off.

Sleep Mode Operations

How to start and cancel the printer's sleep mode.

Printing Setup and Execution

Covers media setup, quality adjustments, and starting a print job.

Media Feed and Cut Operations

Instructions for forwarding, rewinding, and cutting media.

Chapter 2 Advanced Operations

Changing Print Head Height

Procedure for adjusting the print head height to improve print quality.

Releasing Pressure Arms

Steps to release pressure arms to prevent media wrinkles or jamming.

Blower Heater Manual Control

How to manually turn the blower heater on or off.

Advanced System Settings

Configuration of auto cut, vacuum fan, heater, and color maintenance.

Chapter 3 Maintenance

Ink Cartridge Management

Procedures for agitating, checking ink levels, and replacing cartridges.

Waste Ink Tank Emptying

Steps to drain and reset the waste ink tank counter.

Daily Maintenance Routine

Daily cleaning procedures to maintain printer performance.

Printer Head and Internal Cleaning

Head cleaning and inside cleaning instructions.

Replacing Consumable Parts

Guidance on replacing flushing box material, cutter, and cleaning wiper.

Printer Transport and Storage

Procedures for safely transporting and storing the printer.

Long Storage and Initial Charge

Steps for long-term storage and preparing the printer for use.

Chapter 4 Appendix

Troubleshooting and Error Handling

How to handle messages, errors, warnings, and emergency modes.

Product Specifications and Revision History

Technical details including drawing area, specifications, and revision history.