84 If not using the printer for a long period of time
3 Long Storage and Initial Charge
If you will not use this product for a long period of time (2 weeks or longer), perform the “Long Storage” procedure.
If the period of time you will not use this device is within 2 weeks, you can store it in sleep mode.
"Starting and Canceling Sleep Mode" on page 20
The procedures of Long Storage is as follows.
If not using the printer for a long period of time
Important!
Be sure to perform daily maintenance before turning the printer off.
If you turn the power off without performing daily maintenance, the nozzle may become clogged.
Long Storage and Initial Charge
Within 2 weeks
Put the printer in Sleep Mode
More than 2 weeks
Perform “Long Storage”
Turn OFF the printer
Prepare cleaning cartridges
Launch VSM
To Next Page
Loading...
