Performing Initial Charge 87
Performing Initial Charge
[1]
Turn the power button of this product ON.
• Blue light becomes ON.
• The product starts initialization operations.
[2]
Display the Printing Preferences screen of printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 12
[3]
Click the [Maintenance] tab under the [Utility] tab.
[4]
Click [Initial Charge].
• The VSM remote panel opens.
Note
You can perform [Initial Charge] from the [Printer Control] tab on the VSM
remote panel.
"Launching VSM" on page 13
[5]
Click [Start] after emptying the waste ink tank.
"Emptying waste ink tank" on page 62
Press!
To Next Page
Loading...
