Nozzle check and cleaning 35
Before starting everyday operation, please check the nozzle. If nozzle clog is found, conduct cleaning.
When not using white ink
When you are not using white ink, take the following steps to perform nozzle check.
Nozzle check and cleaning
1. Nozzle check steps
[1]
Display the Printing Preferences screen of printer driver.
"Displaying the Printing Preferences screen of printer driver" on page 12
[2]
Click [Nozzle Check] in the [Utility] tab under the [Utility] tab.
• The confirmation window opens.
Note
The same can be also done with the remote panel of VSM.
[3]
Click [OK].
• A pattern is printed.
[4]
Check the pattern.
• When there is nozzle clog, proceed to "Cleaning steps" on page 37.
• When there is no nozzle clog, proceed to "Starting printing" on page
38.
No nozzle clog Nozzle clogged
To Next Page
Loading...
