M307 | MXR
®
Layers
™
Pedal 4
Basic Operation
The MXR
®
Layers
™
Pedal requires a 9-volt (300mA)
center-negative power supply and can be powered
by the Dunlop ECB003 9-volt adapter or the
MXR
®
Iso-Brick,
™
the Iso-Brick
™
Pro, and the Iso-
Brick
™
Mini Power Supplies. This pedal cannot be
powered by a battery.
Power
The pedal always operates with a buffered analog dry
signal, mixing in the wet signal when the effect is engaged.
This scheme ensures seamless transitions between
engaged and bypassed states.
Bypass
To Next Page
Loading...
