2202MYJE-MY-C8-N_2018.02.
Chapter 5 Maintenance and Inspection
Compound 2-stage Screw Compressor 3225**C 5.3 Compressor Disassembly Preparation
5-9
Ball Bearing, Indicator Cam #6000
Snap ring C type External S10
V-ring, Indicator Cam VH10 NBR
Gasket, Suction Flange (1)
Gasket, Suction Flange (2)
Gasket, Discharge Flange (1)
Gasket, Discharge Flange (2)
Mechanical Seal Assembly BBS-E
Potentiometer (1) 1612 1k with Wire
To be replaced if any
abnormality is found.
Potentiometer (2) 200-1K with Wire
To be replaced if any
abnormality is found.
Gear Coupling Assembly (Current Type)
To be replaced if any
abnormality is found.
Knurled Cup Point Socket Set Screw
To be replaced if any
abnormality is found.
To be replaced if any
abnormality is found.
Gasket, Lubricating Oil Inlet Flange (1)
Gasket, Lubricating Oil Inlet Flange (2)
Gasket, Oil Injection Inlet Flange
Tortional Slip Washer (1)
Tortional Slip Washer (2)
Gasket, Balance Piston Lubricating Oil
Outlet Flange
Gasket, Bearing Cover Lubricating Oil
Outlet Flange
Gasket, Main Rotor Casing Oil Return
Flange