Mylaps X2 - Technical specifications

X2 transponder version 2018 © MYLAPS rights reserved 8
3. Technical specifications
General X2 Transponder
Dimensions
98x52x23 mm / 3.86x2.05x0.91 in
Weight
120 gr / 0.26 lb
Housing
Water and shock proof IP 67
Signal transfer
Magnetic induction
Operating temperature range
-20 to + 50 -4 to +122 F
CAN bus
CAN 2.0A compliant
Baudrate
1 mbit/s
Termination resistor
120 Ohm
Connections
4 pin M8 sensor connector
4 pin docking
Internal battery
5 days
ID
Unique 7-digit number
Input voltage
8-17 VDC
Power consumption
Max. 140 mA
12 VDC (145 mA with X2 RaceKey)
Battery operating time
Min. 4 days (after full charge)
Battery Charging time
Min. 4 hours for full charge
U
Car/Bike
Timing resolution
2 ms
Max. Speed
260 km/h (162.5 mph)
Transponder position
Max. Height 120 cm (4 ft.) for bikes, 60 cm (2 ft.) for cars.
Clear view to the asphalt
Kart
Timing resolution
3ms
Max. Speed
120 km/h (75 mph)
Transponder position
Max. Height 30 cm (2 ft.)
MX
Timing resolution
6ms
Max. Speed
120 km/h (75 mph)
Transponder position
Max. Height 120 cm (4 ft.)