myPOS D210c - Using D210 C with Wireless (Wi-Fi) Router

please follow the procedure described in the “How to connect your D210c
with Wi-Fi” section. The myPOS Mobile application is not required for using
this type of connection but you can download and use it for managing your
e-money account.
C. Windows Phone 8.0 or later
If you are using a mobile phone which runs Windows Phone 8.0
or later, you can connect your D210c ONLY via Wi-Fi (Personal
Hotspot).
To connect via Wi-Fi (Personal Hotspot) activated on your mobile phone,
please follow the procedure described in the “How to connect your D210c
with Wi-Fi” section. The myPOS Mobile application is not required for using
this type of connection but you can download and use it for managing your
e-money account.
Using D210c with a wireless (Wi-Fi) router
Make sure your Wi-Fi router is connected to the Internet. In order to connect
your D210c device to your Wi-Fi router, please read carefully the information
below. Please be aware that the supported encryption methods for Wi-Fi
networks are WPA and WPA2.
For proper operation of the D210c device, please make sure that:
your router does not have any
network traffic restrictions or filters
your router does not require setting a
special TCP/IP configuration on your
network devices (D210c will use the
default settings only)
network signal is strong enough. The
network signal strength is indicated via
a Wi-Fi signal icon located in the upper
part of your D210c screen.
To connect via a Wi-Fi router, please follow the procedure described in the
“How to connect your D210c with Wi-Fi” section.
џ
џ
џ
EN 5|