iVector S2
Installation manual
iVector S2 • 2022-07-01
US
Onboard and remote control setup menu
6.1 Setup menu 31-32
0-10V Models
7.1 0-10V fan control 33
7.2 Connection diagram with 0-10V DC thermostats / signals 33
7.3 Fan speed regulation 33
User instructions
. Onboard and remote-mounted control operation 34
. Display 34
. Key function 34
. Activation 35
. Heating / cooling operation modes setting 35
. Stand-by 35
. Temperature selection 35
. Automactic operation 36
. Silent operation 36
. Night-time operation 36
. Operation at maximum fan speed 36
. Key lock 36
. Reduce brightness to minimum 36
. Room temperature probe regulation offset 37
. Switching off for longer periods 37
Contents (continued)
To Next Page
Loading...
