N-Com BX4 PLUS - Bluetooth A2 DP Music Player

20
9. STEREO FM RADIO
BX4 PLUS is equipped with Stereo FM radio with RDS (Radio Data System) technology,
which automatically selects the strongest signal available for the FM radio you want to
listen to, regardless of your location.
You can scroll through the band of frequencies using the automatic search function, pre-
set up to 6 favourite radio stations and change stations among the pre-set ones.
Turning on the radio
The radio turns on automatically by selecting the “Radio”
menu (scroll through the menu by pressing “on” for 2
seconds).
Turning off the radio
The radio turns off when you change the menu item
(scroll through the menu by pressing “on” for 2 seconds)
New station automatic
search
Press “+” and keep it pressed for 2 seconds
Pre-setting a radio station Press “+” and keep it pressed for 4 seconds.
This function can also be turned on through PC
using the “N-Com Wizard” programme.
Changing radio stations
(among the pre-set ones)
Press “-” and keep it pressed for 2 seconds
10. BLUETOOTH A2DP MUSIC PLAYER
You can listen to high quality music by connecting BX4 PLUS to a device equipped with
Bluetooth A2DP (Advanced Audio Distribution Profile) protocol.
The BX4 PLUS system is also equipped with Bluetooth AVRCP (Audio Video Remote
Control Profile) protocol, which allows you to stop and resume music reproduction directly
from the helmet (with devices equipped with AVRCP).
Connection to A2DP music
player
The connection is automatic when you turn on the
system. Wait a few seconds for the connection.
Play music (Play) Press the “+” button and keep it pressed for 2 seconds.
Pause function (Pause)
When the player is connected and playing music, press
“+” for 2 seconds.
Next track (Skip)
When the player is playing music, press “+” for 4 about
seconds.
Stop playing music (Stop)
Press “-” for 2 seconds. The music stops and the A2DP
player is disconnected.
By moving to another function with the menu key, the system automatically disconnects
the A2DP device.
Note: The Bluetooth intercom does not work while listening to an A2DP audio source.