N-Tron 708FX2 - Show or Clear the Last System Error; Show System Information

(Revised 2015-09-28) Page 139 of 157
CLI Commands, Continued…
Show or Clear the Last System Error
Command Name
Syserr
Description
Show or clear the last system error
If clear is not supplied, then the last system error is displayed.
Syntax
syserr [clear]
Parameters
Clear
Clear the last system error.
Example
N-TRON/Admin> syserr
Last System Error: None.
N-TRON/Admin> syserr clear
Last System Error: Cleared.
Notes
Show System Information
Command Name
Sysinfo
Description
Show system information
Syntax
Sysinfo
Parameters
None
Example
N-TRON/Admin> sysinfo
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ N-Tron 700/7000 Series
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
+ Model: 708TX
+ Boot Loader: BL 2.0.5.1 (0x02000501)
+ OS Version: 2.0.5
+ Build Date: Mar 16 2009 at 11:19:27
+ Copyright: Copyright (c) 2008-2009 N-Tron Corporation All rights
reserved.
+
+ Processor: 66 MHz (66000000)
+ SDRAM Size: 16 MB
+ Flash Size: 8 MB
+ File System: 6422528 Bytes, 1432576 Free, 4989952 Used, 0 Bad
+ MAC Address: 00:07:af:fe:af:c0
+ IP Address: 192.168.1.201
+ Subnet Mask: 255.255.255.0
+ Gateway: 192.168.1.1
+
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Notes