GT20 Swing Door Owners Manual www.NabcoEntrances.com
Part #C-00170 Rev. 8-29-17
10 of 10
Secon 8.7: Safety Decals for Low Energy Units
Doors shall be equipped with (a) decal(s) visible from either side, instructing the user as to the operation and function of the
inch high minimum.
Note: For additional decals or labels for automatic doors, call your automatic door supplier.
Decal Description
Activate Switch to Operate X (2) Activate Switch signs, shall be adhered to both sides of door, with the
words “Automatic Caution Door and Activate Switch to Operate” to be
clearly visible.
X The sign shall be a minimum of 6 inches in diameter. Black lettering shall be
a minimum 5/8 inch tall on a yellow background. White lettering shall be a
minimum 1/2 inch tall on a blue background.
AAADM
Safety Information Label
(Low Energy Swing Doors)
X (1) Safety Information sign shall be adhered to Jamb Tube on Interior Side of
Door Panel.
X The sign shall be a minimum of 9 inches tall. Black lettering shall be a
minimum of 10 point type on a white background. White lettering shall be a
minimum of 10 point type on a blue background.
Pull to Operate When Push/Pull is used to initiate the operation of the Door Operator
PULL
TO
OPERATE
Push to Operate
PUSH
TO
OPERATE
Easy Open Door
Push to Operate
When Power Assist is used to initiate the operation of the Door Operator
EASY OPEN
DOOR PULL
TO OPERATE
Easy Open Door
Pull to Operate
EASY OPEN
DOOR PUSH
TO OPERATE
To Previous Page
Loading...
Need help?
General
