Nabco 710 User Manual

Model 710 Swing Door System
NABCO
ENTRANCES INC 877-622-2694 www.nabcoentrances.com
DN0011
Automatic
Entrance
Systems
NABCO ENTRANCES Inc.
S82 W18717 Gemini Drive
P.O. Box 906
Muskego, WI 53150
Phone: 877-622-2694
Fax: 888-679-3319
www.nabcoentrances.com
Retrofit Kit Manual
Model 710 Swing Door System
Low Energy Operator
WARNING
Do not install, operate or service this product unless you have read and understand the Safety Practices,
Warnings, Installation and Operating Instructions contained in this manual. Failure to do so may result
in property damage, or bodily injury.
Part Number 15-10677
August 23, 2004 Revision INSTALLATION MANUAL
G Y R O T E C H
Magnum Board IV.
Retrofit kit (Old Casting)

Nabco 710 Specifications

General

Brand	Nabco
Model	710
Category	Door Opening System
Language	English

Summary

Overview

To The Installer

Explains the purpose of the manual for the purchaser and installer.

Specifications

Tools required

Lists the necessary tools for installation and adjustments.

Handing Requirements

Hardware Kit List

Mounting Magnetic Switch Assembly

Single Door Conversion

Simultaneous Pair Door Conversion

Hydraulic Closer

Door Closing Adjustment Procedure

Setting Back Check and Door Closed Switches

Simultaneous Pair Installations

Control Switches

Signage

Troubleshooting

Appendix A

Excerpts from ANSI/BHMA A156.19

Details requirements for low energy swinging power operated doors.

Opening Time Requirements

Specifies field adjustments for door opening time to back check or fully open.

Closing Time Requirements

Details field adjustments for door closing time from 90 degrees to 10 degrees.

Door Hold Open Time

Specifies the minimum time a door must remain fully open without a sensing device.

Opening/Closing Force Limit

Defines the maximum force to prevent door movement in opening or closing.

Kinetic Energy Limit

Sets the maximum kinetic energy for a door in motion.

Manual Force During Power Failure

Specifies manual force limits for operating the door during power failure.