Nabco GT20 - User Manual

Part #C-00170
Rev. 8/29/17
S82 W18717 Gemini Drive; Muskego, Wisconsin 53150
Phone: (877) 622-2694
Fax: (888) 679-3319
www.nabcoentrances.com
Technical Support: (866) 622-8325
NABCO hours of Operaon: Monday to Friday 8:00 a.m.- 4:30 p.m. (Central Time)
Model GT20
Full Automac and Low Energy Power Operated Doors
OWNER’S MANUAL
A Founding Member of: AAADM
(American Associaon of Automac Door Manufacturers)
WARNING
• Turn OFF all power to the Automac Door if a Safety System is not working.
• Instruct the Owner to keep all power turned OFF unl correcve acon can be achieved by a NABCO
trained technician. Failure to follow these pracces may result in serious consequences.
• NEVER leave a Door operang without all Safety detecon systems operaonal.
Table of Contents
CHAPTER 1: WARNING LABELS ................................................... 2
CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS ................................ 2
CHAPTER 3: SCOPE .............................................................. 2
SECTION 3.1: To the Customer .................................................................2
SECTION 3.2: Objecve .......................................................................2
CHAPTER 4: GETTING STARTED ................................................... 2
SECTION 4.3: Safety Standard Compliance .......................................................3
SECTION 4.4: Limited Warranty ................................................................3
SECTION 4.5: Informaon Provided by Door Supplier ..............................................3
CHAPTER 5: GENERAL SAFETY .................................................... 3
CHAPTER 6: OPERATION ......................................................... 4
CHAPTER 7: FULL AUTOMATIC SWING DOOR ....................................... 4
SECTION 7.1: Sensors ........................................................................4
SECTION 7.2: Sensor Types ....................................................................4
SECTION 7.3: Sensor Malfuncons ..............................................................5
SECTION 7.4: Daily Safety Check ................................................................6
SECTION 7.5: Safety Decals for Full Automac Swing Doors .........................................8
CHAPTER 8: LOW ENERGY SWING DOOR ........................................... 9
Secon 8.6: Daily Safety Check .................................................................9
Secon 8.7: Safety Decals for Low Energy Units ..................................................10

Summary

CHAPTER 1: WARNING LABELS

CHAPTER 2: GENERAL SAFETY RECOMMENDATIONS

CHAPTER 3: SCOPE

SECTION 3.1: To the Customer

Familiarizes the owner with proper door operation and the importance of safety compliance.

SECTION 3.2: Objective

Outlines the manual's objective: operation, maintenance, and daily safety inspection instructions.

CHAPTER 4: GETTING STARTED

SECTION 4.3: Safety Standard Compliance

Details compliance with industry safety standards like ANSI/BHMA for automatic doors.

SECTION 4.4: Limited Warranty

Explains the limited warranty provided by NABCO Entrances Inc. for their products.

SECTION 4.5: Information Provided by Door Supplier

Lists essential information that door suppliers must provide to the owner/caretaker.

CHAPTER 5: GENERAL SAFETY

CHAPTER 6: OPERATION

CHAPTER 7: FULL AUTOMATIC SWING DOOR

SECTION 7.1: Sensors

Describes the types of sensors (Infrared/Microwave) used for door activation.

SECTION 7.2: Sensor Types

Details specific sensor types like Motion and Presence Sensors used for activation.

SECTION 7.3: Sensor Malfunctions

Lists common causes for sensor malfunctions in automatic doors.

SECTION 7.4: Daily Safety Check

Provides step-by-step instructions for performing a daily safety check on the swing door.

SECTION 7.5: Safety Decals for Full Automatic Swing Doors

Specifies requirements for safety signage on automatic swing doors.

CHAPTER 8: LOW ENERGY SWING DOOR

Section 8.6: Daily Safety Check

Outlines the daily safety inspection procedure for low energy swing doors.

Section 8.7: Safety Decals for Low Energy Units

Details required decals for low energy swing door operation and safety.

Nabco GT20 Specifications