Model 710 Swing Door System
NABCO
ENTRANCES INC 877-622-2694 www.nabcoentrances.com - 2 -
CAUTION:
Read these safety practices before installing, operating or servicing the automatic door. Failure to follow
these practices may result in serious consequences.
Read, study and understand the operating instructions contained in or referenced in this manual before
operating. If you do not understand the instruction, ask the installing qualified technician to teach you
how to use the door.
This manual and the owners’ manual must be given to and retained by the purchasing facility or end
user.
1. If the door appears broken or does not seem to work correctly, it should be immediately removed
from service and a qualified service technician contacted for corrective action.
2. Disconnect power at the fused disconnect during all electrical or mechanical service. When uncertain
whether power supply is disconnected, always verify using a voltmeter.
3. All electrical troubleshooting or service must be performed by qualified electrical technicians and
must comply with all applicable governing agency codes.
4. It is the responsibility of the installing door technician to install all warning and instructional labels in
accordance with ANSI A156.19.
5. It is the responsibility of the purchasing facility or end user to keep warning and instructional labels
and literature legible, intact and with the door.
6. Replacement labels and literature may be obtained from local NABCO Entrances Inc. distributors.
If the name of the local distributor is unknown, contact NABCO Entrances Inc. at (877-622-2694)
for assistance.
7. Do not place finger or uninsulated tools inside the electrical control box. Touching wires or other
parts inside the enclosure may cause electrical shock, serious injury or death.
To Next Page
Loading...
Need help?
General
