NAD 314 - Front and Rear Panel Views

2>REAMPLIFIER SECTION
2HONO INPUT
nput impedance (R and C)
nput sensitivity (ref. rated power, 1 kHz)
nput overload at 20 Hz / kHz / 20 kHz
THD (20 Hz - 20 kHz) and IM dist.
RIAA accuracy
Signal / Nosie ratio
‘A-weighted with cartridge connected)
LINE LEVEL INPUTS
‘CD, Video, Auxiliary, Tuner, Tape)
MM: 47 kohms + 200pF
MM: 2.5 +0.3 mV
MM: 22 mV / 220 mV / 2.0 V
0.03% at 5 mV input
+ 0.5 dB
MM: 76 GB ref. 5 mV
REAR PANEL / FRONT PANEL VIEW
FRONT PANEL
Stereo integrated Amplifier 314
TONE TREBLE
DEFEAT , ‘
o©M
1. POWER 7. BALANCE
nput impedance (R and C) 20 kohms + 500 pF 2. PHONES 8. TAPE 1 MONITOR
sitive
3.
EXTRA
SPEAKERS
9.
INPUT
SELECTOR
(TAPE
2,
TUNER,
AUX,
input sensitivity (ref. rated power) 170 +10 mV 4 BASS VIDEO, CD, PHONO)
: 5. TONE DEFEAT 10. VOLUME
Viaximum
input
signal
>
10V
6.
TREBLE
11.
POWER
INDICATOR
Signal/ Noise ratio, A-weighted 88 dB ref. 1 W
+0.3
dB
(tone
defeat
on)
and
it
poses
a
hazard
to
anyone
removing
the
cover
to
gain
instruction
manual
and
its
warnings
for
proper
operation
of
the
oe
access
to
the
interior
of
the
unit.
Only
qualified
service
per-
unit.
+0.5
dB
(tone
defeat
off)
sonnel should make any such attempt.
1
03.5
dB
ref.
rated
power
The
graphic
symbol
of
a
lightning
flash
with
an
arrow
point
within
a
The
graphic
symbol
of
an
exclamation
point
within
an
equilateral
tri-
triangle
signifies
that
there
is
dangerous
voltage
within
the
unit
angle
warns a
user
of
the
device
that
it
is
necessary
to
refer
to
the
=requency
response,
20
Hz
-
20
kHz
THD, SMPTE IM, IHF IM and TIM< 0.01% at 5 V out
LINE LEVEL OUTPUTS
REAR PANEL CONNECTIONS
Preamp output impedance 220 ohms
Tape output impedance Source Z + 2 kohms
eadphones output impedance 220 ohms
Viaximum output level preamp-out: >12V
tape-out: >10V SOUND AUX TUNER
headphones-out:
> 10 V into 600 ohms
> 500 mV into 8 ohms
CONTROLS
Treble + 7 dB at 10 kHz
Bass + 10 dB at 50 Hz
Infrasonic
filter
-3
dB
at
10
Hz
1.
AC
LINE
CORD
CD
INPUT
12
tav
8.
db / octave 2, AC OUTLET (ONLY IN 120V MODEL) 9. VIDEO SOUND INPUT
3. SPEAKER TERMINALS “A” 10. AUXILIARY INPUT
4. SPEAKER TERMINAL ‘B” 11. TUNER INPUT
5, SOFT CLIPPING 12. TAPE 2 INPUT/OUTPUT
6. PHONO GROUND 13. TAPE 1 INPUT/OUTPUT
7. PHONO INPUT 14. PREAMP OUT, MAIN IN