Need help?Do you have a question about the NAD 7175PE and is the answer not in the manual?
General| Brand | NAD |
|---|---|
| Model | 7175PE |
| Category | Stereo Receiver |
| Language | English |
Discusses optimal placement for performance and ventilation.
Warns against liquid ingress and advises against self-repair.
Plug the AC line cord into a "live" wall socket for power.
Accessory outlets for other stereo components, switched/unswitched.
Connects the first pair of loudspeakers to terminals A.
Connects the second pair of loudspeakers to terminals B.
Connects external FM and AM antennas to the receiver.
Built-in ferrite rod for AM reception, pivotable.
Connects turntables to the amplifier for vinyl playback.
Connects turntable ground wire to reduce hum.
Selects cartridge type (MM or MC) for optimal phono input.
Audio input for video sources like VCRs or players.
Audio input for CD players or other line-level sources.
Connects a tape recorder for recording/playback.
Connects a second tape recorder for dubbing/processing.
Connects external processors or power amps between preamp and power amp.
Minimizes audible distortion at high volume levels.
Selects impedance setting (4Ω or 8Ω) for speaker connection.
Turns the receiver and connected accessories on/off.
Connects stereo headphones for private listening.
Selects which speaker set(s) are active (A, B, or A+B).
Adjusts the level of low frequencies in the sound.
Adjusts the level of high frequencies in the sound.
Boosts very low bass frequencies, below 60 Hz.
Disables infrasonic filter for specific audio processing.
Blends stereo channels or forces mono FM reception.
Disables automatic noise reduction for FM signals.
Selects source signal to be sent to tape output jacks.
Selects the audio source for listening.
Reduces output level for better volume control range.
Boosts bass/treble at low volumes for tonal balance.
Adjusts overall loudness and channel balance of audio.
Displays frequency, signal strength, and tuning accuracy.
Lights indicating FM Stereo, Soft Clipping, etc.
Stores favorite radio station frequencies for quick access.
Mode to store station presets into memory.
Selects between AM and FM tuning bands.
Adjusts tuning frequency up or down via rocker switch.
Scans for stations automatically in a station-by-station mode.
Explains the thermal circuit breaker and its function in preventing overheating.
To Next Page
