Need help?Do you have a question about the NAD 7120 and is the answer not in the manual?
General| Tuning range | FM, MW |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion | 0.03% |
| Speaker Impedance | 4 - 16 ohms |
| Power Output | 20 watts per channel (8 ohms) |
| Input Sensitivity | 150 mV (line) |
| Speaker load impedance | 4-16 ohms |
Details on connecting AM and FM antennas for optimal reception.
Instructions for connecting turntables, including grounding.
Connecting audio sources like tape decks and other line-level devices.
Information on the DC output for accessories and speaker connection guidelines.
Guide to setting speaker impedance for optimal amplifier performance.
Connecting the power cord and using the unswitched AC outlet.
Using the power button and headphone jack with safety precautions.
How to use the Bass, Treble, and Balance controls for sound tuning.
Adjusting volume and activating loudness for low-level listening.
Enhancing low-frequency response for deeper bass reproduction.
Using the tape monitor and selecting audio input sources.
Operating the tuner, storing stations, and understanding the display.
Understanding the FM Stereo Beacon and Power Indicator LEDs.
Guidance on preventing receiver overload and understanding speaker impedance effects.
To Next Page
