Need help?Do you have a question about the NAD 7155 and is the answer not in the manual?
General| Brand | NAD |
|---|---|
| Model | 7155 |
| Category | Stereo Receiver |
| Language | English |
Details power output, distortion, and headroom for stereo mode.
Details power output and headroom for monophonic bridged mode.
Details input impedance, sensitivity, and frequency response.
Details sensitivity, selectivity, and stereo separation for FM.
Details usable sensitivity and selectivity for AM.
Lists dimensions, weight, and power consumption.
Procedure to adjust the oscillator tuning voltage.
Procedure for tracking RF adjustments across frequencies.
Procedure for adjusting the intermediate frequency stages.
Procedure for coarse alignment of the detector circuit.
Procedure for final alignment of the detector circuit.
Procedure for setting the autosearch level threshold.
Procedure for aligning the stereo decoder and MPX filters.
Procedure for adjusting the dynamic separation circuit.
Procedure for aligning the synthesizer frequency.
Procedure for aligning the AM oscillator.
Procedures for aligning antenna and IF stages for AM.
Procedure for adjusting 9 kHz and 10 kHz whistle filters.
Procedure for calibrating the signal meter and auto-stop function.
Procedure to set idle current for amplifier channels.
Procedure to set output offset voltage to zero.
To Next Page
