NAD C 298 Quick Setup Guide

®
C 298 Stereo Power Amplier
Quick Setup Guide
© NAD C 298
1.
2.
Speakers
© NAD C 298
© NAD C 298
© NAD C 298
© NAD C 298
IMPORTANT NOTES
• The blue terminals must never be connected to ground (earth).
• Never connect the blue terminals together or to any common ground device.
• Do not connect the output of this amplier to any headphone adapter, speaker
switch or any device that uses common ground for left and right channels.
IMPORTANT NOTES
Maintain default settings of the following control switches:
• LEFT and RIGHT SELECT towards SINGLE-ENDED
• INPUT SELECT to FIX
• AUTO SENSE LEVEL to MID
© NAD C 298
© NAD C 298
External Device
nadelectronics.com/product/C298-stereo-power-amplier
support.nadelectronics.com
!

NAD C 298 Specifications

General

Power Output (8Ω)	185 W
Signal-to-Noise Ratio (A-weighted)	> 120 dB
Input Impedance	20 kΩ
Damping Factor (20Hz-6.5kHz, 8Ω)	>800
Power Consumption (Standby)	<0.5W
IHF Dynamic Power into 4 Ohms	400 W
Gain	29 dB
THD (20 Hz - 20 kHz) at 1W	<0.002 %
Frequency Response	20Hz - 20kHz
Input Sensitivity	1.4V
Rated Power into 4 Ohms	340W