To Next PageTo Next Page
Need help?Do you have a question about the NAD C 352 and is the answer not in the manual?
General| Power Output | 80 W per channel into 8 ohms |
|---|---|
| Total Harmonic Distortion (THD) | < 0.03% |
| Frequency Response | 20 Hz - 20 kHz |
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kOhms |
| Signal to Noise Ratio | > 100 dB |
Details conditions requiring professional service for the amplifier.
Specifies using manufacturer-approved parts and performing safety checks after repairs.
Instructions and recommendations for mounting the unit on a wall or ceiling.
General warnings about electrical hazards, moisture, and proper unit placement for ventilation.
Special instructions and safety advice for customers in the United Kingdom.
Guidance on responsible disposal and recycling of the product at its end of life.
Safety precautions related to power lines, antennas, and grounding to prevent electrical hazards.
For passing remote control commands between NAD components for system control.
Connects various audio sources like CD players, tuners, and video devices.
Ports for connecting tape recorders for recording and playback.
Outputs for connecting to external power amplifiers or processors.
Input for external pre-amplifiers or processors to bypass internal pre-amp.
Connects loudspeakers to the amplifier, with notes on wiring and connectors.
Feature to minimize audible distortion when the amplifier is overdriven.
For remotely switching ancillary equipment on or off.
Connects the unit to mains power and provides an auxiliary switched outlet.
LED indicator for amplifier status, operation, and protection modes.
Standard 1/4" jack for headphone listening, automatically mutes speakers.
Sensor window that receives commands from the remote control handset.
Buttons to choose the active audio source for playback.
Visual indicator for the activation of the Soft Clipping™ feature.
Adjusts the tonal balance and allows bypassing of tone circuits.
Adjusts the relative levels of left/right speakers and overall system loudness.
Description of NAD's patented amplifier circuit for enhanced power delivery.
Guides for making recordings and copying between tape decks.
Controls for powering on/off, muting, selecting inputs, and adjusting volume remotely.
Remote functions for operating NAD Tuner and CD Player models.
Remote commands for operating a connected NAD cassette deck.
Diagnosing and resolving problems related to no audio output or single-channel sound.
Addresses issues with weak bass, diffuse sound, or lack of stereo imaging.
Troubleshooting steps for when the remote control handset is not working correctly.
Resolving issues where the power/protection LED remains red.
Detailed technical specifications for the amplifier's performance metrics.
