NAD C 316 BEE - Tone, Balance, and Volume Adjustments

8 TONE DEFEAT
• The TONE DEFEAT switch bypasses the tone control section of the
C 316BEE.
• If the Tone Controls are not normally used and left in the 12 o’clock
position, then it is advisable to switch out the Tone Control section
altogether by using this switch.
• In the ‘out’ position, the Tone Control circuits are active; pushing the
TONE DEFEAT switch ‘in’ bypasses the Tone Control section.
9 BALANCE
• The BALANCE control adjusts the relative levels of the left and right
speakers.
• The 12 o’clock position provides equal levels to both the left and
right speakers. A detent indicates this position.
• Rotating the control clockwise moves the balance towards the right.
Rotating the control counterclockwise moves the balance to the
left.
10 VOLUME
• The VOLUME control adjusts the overall loudness of the signals sent
to the loudspeakers or headphones.
IDENTIFICATION OF CONTROLS
FRONT PANEL
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ