NAD M15 HD - Page 20

Select the Target Curve you nd to be most satisfactory by pressing the
Audyssey key of the remote. The MultEQ XT corrected response can also be
bypassed if you wish.
It is recommended that you take full advantage of the M15 HD’s Audyssey
Auto Calibration feature for your speaker setup. However, if you desire to
setup your speakers manually or if you already had run Audyssey Auto
Calibration but would like to make adjustments, the following sections on
Speaker Conguration, Speaker Levels and Speaker Distance can also be
followed and implemented.
NOTE
 Duringmanualsettingofyourspeakers,previouslycalibrated
Audysseysettingscouldberetrievedbyre-adjustingbackthealtered
congurationsashighlightedbyanasterisk.
OPERATION
USING THE M15 HD  SETUP MENU
20
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ