88
88
8
ABOUT THE T 752
UPGRADABILITYUPGRADABILITY
UPGRADABILITYUPGRADABILITY
UPGRADABILITY
The T 752 receiver permits flexible system growth via individually accessible pre-out and main-in jacks for all
three front channels, enabling external amplifiers to be used for any of these while still maintaining utility
of the receiver’s on-board power-amplifier channels for additional channels, remote-room links, or any other
suitable purpose. Of course, the T 752’s Surround Back channel outputs let a system grow from 5.1 to 6.1
or 7./1 channels, simply by adding a 1- or 2-channel external amplifier. See “Rear Panel (Audio Pre-Out),”
below.
Packed with your T 752 is the NAD HTR 2 remote control, a full-system remote especially designed to be easy
to use and easy to understand. Be sure to read the section “Using the HTR 2 Remote Control,” below, to
familiarize yourself with the remote’s layout and operations before proceeding to setup your receiver.
Chances are, you will want to use your HTR 2 as your primary way to command your entire A-V system. The
HTR 2 can be employed to operate additional NAD or other-brand components such as a DVD/CD player,
television, satellite/HDTV tuner, VCR, or virtually anything else that operates via standard infrared remote
control.
ABOUT THE HTR 2 SYSTEM REMOTE CONTROLABOUT THE HTR 2 SYSTEM REMOTE CONTROL
ABOUT THE HTR 2 SYSTEM REMOTE CONTROLABOUT THE HTR 2 SYSTEM REMOTE CONTROL
ABOUT THE HTR 2 SYSTEM REMOTE CONTROL
To Next Page
Loading...
