Why does my NAD Stereo Receiver have weak bass and a diffuse stereo image?
If your NAD Stereo Receiver has weak bass or a diffuse stereo image, check the connections to all speakers in the system to ensure they are wired in phase.
Why can't I select “DOLBY DIGITAL” on my NAD Stereo Receiver?
If you cannot select “DOLBY DIGITAL” on your NAD Stereo Receiver, ensure that the source is connected using digital in/outputs. Also, verify that the digital input has been assigned to the selected input.
General| Power Output | 100 watts per channel (8 ohms, 20Hz-20kHz, 0.05% THD) |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 150 mV |
| Signal-to-Noise Ratio | > 100 dB |
| Dimensions | 17.1 x 6.4 x 15.7 inches |
| Weight | 44.1 lbs |
| Input Impedance | 47 kOhms |
| Tuner Bands | AM/FM |
| Surround System Class | 7.1 channel |
| Digital Sound Processor (DSP) | Yes |
| Input Channel Qty | 7 |
| Output Channel Qty | 7 |
| Radio Tuner | AM/FM |
| Width | 17.1 inches |
| DSP Presets | Multiple presets available |
Warnings on electric shock, fire, moisture, and proper placement.
Explains the functions of various buttons on the remote handset.
Guidelines for unit placement, ventilation, and cleaning.
Detailed explanations of rear panel input/output terminals.
Assigning digital inputs and selecting surround sound effects.
Overview of the OSD system for setup and configuration.
Menus for selecting inputs and configuring speaker systems.
Configuring speaker types and setting distances for optimal sound.
Adjusting output levels of speakers for balanced sound.
Methods for calibrating speaker levels using OSD or remote.
To Next Page
