21
14.9 switch-on
After switch-on, via the power supply or power amplifier
power button, the NAC 112 will remain muted for 15
seconds while control systems and circuits stabilise.
14.10 remote control
The NARCOM 3 remote handset supplied with the NAC 112
duplicates all configuration options. See Section 17 for
more information. The Flash handset will also control the
NAC 112. See Section 16 for more information.
14.11 defaults
To restore all programmable settings to the factory defaults
press and hold the remote handset disp key while the
preamplifier is in program mode. The preamplifier will exit
from program mode following this operation.
NAC 112
To Next Page
Loading...
