NAIM NAIT 50 - Set-up

5
volume
headphone
phono stream aux mains
power
4. Set-up
Your NAIT 50 must be connected to a source (such as the NDX2 or your
turntable), but before you do, please ensure both components are in their nal
positions and disconnected from mains power.
For optimum performance, use a dedicated hi- support – ideally Naim Fraim –
with the NAIT 50 sited above the source, as shown.
For more information, see section 5.1
Ensure all equipment is o before connecting.
Connect the DIN interconnect cable supplied with the NDX2 to the Stream
input of the NAIT 50.
PLEASE READ THE MANUAL BEFORE USE
S/No.
Bluetooth
Wi-Fi
Contains Transmitter Modules
FCC ID: 2ACURNP800, 2ACURBLUE, 2ACURZIGEE
IC ID: 12217A-NP800, 12217A-BLUE, 12217A-ZIGEE
REFER TO OWNERS MANUAL
Fit NDX 2 link plug or PSU upgrade
Power Supply Upgrade
2 1
3
Network
Aerial
Power
Analogue Outputs
DIN
L R
Default
Floating
RCA
ch.1
NDX 2
WARNING:
DISCONNECT SUPPLY CORD
BEFORE OPENING
DESIGNED AND MADE IN ENGLAND BY
NAIM AUDIO LTD.
SOUTHAMPTON ROAD, SALISBURY
E2378
ch.2
-ve
Signal Ground
USB
4
Wi-Fi
IR Out
IR Out
Digital Out
INPUT POWER: 60VA
FUSE RATING: ANTISURGE
100-120 V: T4AL.
220-240 V: T2AL.
AC ONLY
FREQUENCY: 50/60Hz
Digital Inputs
PLEASE READ THE MANUAL BEFORE USE
S/No.
Bluetooth
Wi-Fi
Contains Transmitter Modules
FCC ID: 2ACURNP800, 2ACURBLUE, 2ACURZIGEE
IC ID: 12217A-NP800, 12217A-BLUE, 12217A-ZIGEE
REFER TO OWNERS MANUAL
Fit NDX 2 link plug or PSU upgrade
Power Supply Upgrade
2 1
3
Network
Aerial
Power
Analogue Outputs
DIN
L R
Default
Floating
RCA
ch.1
NDX 2
WARNING:
DISCONNECT SUPPLY CORD
BEFORE OPENING
DESIGNED AND MADE IN ENGLAND BY
NAIM AUDIO LTD.
SOUTHAMPTON ROAD, SALISBURY
E2378
ch.2
-ve
Signal Ground
USB
4
Wi-Fi
IR Out
IR Out
Digital Out
INPUT POWER: 60VA
FUSE RATING: ANTISURGE
100-120 V: T4AL.
220-240 V: T2AL.
AC ONLY
FREQUENCY: 50/60Hz
Digital Inputs