Need help?Do you have a question about the NAiS FPG-C32T2 and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| I/O points | 32 |
| Input | 16 |
| Output | 16 |
| Output type | Transistor |
| Power supply | 24 V DC |
| Input Voltage | 24 V DC |
| Number of Inputs | 16 |
| Number of Outputs | 16 |
| Mounting Type | DIN Rail |
| Operating Temperature | 0°C to 55°C |
Explains the core capabilities and communication features of the FP esidential unit.
Details the physical components and their functions on the FP control unit.
Provides detailed electrical and performance specifications for input and output points.
Explains the assignment of I/O numbers for the FP control unit and its expansion units.
Covers environmental requirements and methods for installing the FP unit.
Details the procedures and precautions for wiring the power supply.
Explains how to wire input and output devices correctly.
Outlines essential safety measures, power failure handling, and protection.
Introduces the built-in high-speed counter functions: counter, pulse output, and PWM output.
Explains the operation, input modes, and instructions for the high-speed counter.
Describes pulse output methods, control modes, and related instructions for positioning.
Explains the pulse width modulation (PWM) output function and its instructions.
Details computer link, general-purpose serial, and PLC link communication functions.
Provides an overview of the computer link function and its protocol.
Explains the overview and operation of general-purpose serial communication.
Describes the LED indicators for status and error conditions on the control unit.
Provides procedures for troubleshooting common errors based on LED status and error codes.
To Next Page