NAiS FPG-C32T2 - Page 276

FPΣ
13.5 Table of Special Internal Relays
13 - 27
Relay No. Name Description
R9070 MEWNET-W0
PLC link operation
mode
relay
Unit No. 1 Turns on when unit No. 1 is in the RUN mode.
Turns off when unit No. 1 is in the PROG. mode.
R9071
mode relay
Unit No. 2 Turns on when unit No. 2 is in the RUN mode.
Turns off when unit No. 2 is in the PROG. mode.
R9072 Unit No. 3 Turns on when unit No. 3 is in the RUN mode.
Turns off when unit No. 3 is in the PROG. mode.
R9073 Unit No. 4 Turns on when unit No. 4 is in the RUN mode.
Turns off when unit No. 4 is in the PROG. mode.
R9074 Unit No. 5 Turns on when unit No. 5 is in the RUN mode.
Turns off when unit No. 5 is in the PROG. mode.
R9075 Unit No. 6 Turns on when unit No. 6 is in the RUN mode.
Turns off when unit No. 6 is in the PROG. mode.
R9076 Unit No. 7 Turns on when unit No. 7 is in the RUN mode.
Turns off when unit No. 7 is in the PROG. mode.
R9077 Unit No. 8 Turns on when unit No. 8 is in the RUN mode.
Turns off when unit No. 8 is in the PROG. mode.
R9078 Unit No. 9 Turns on when unit No. 9 is in the RUN mode.
Turns off when unit No. 9 is in the PROG. mode.
R9079 Unit No. 10 Turns on when unit No. 10 is in the RUN mode.
Turns off when unit No. 10 is in the PROG. mode.
R907A Unit No. 11 Turns on when unit No. 11 is in the RUN mode.
Turns off when unit No. 11 is in the PROG. mode.
R907B Unit No. 12 Turns on when unit No. 12 is in the RUN mode.
Turns off when unit No. 12 is in the PROG. mode.
R907C Unit No. 13 Turns on when unit No. 13 is in the RUN mode.
Turns off when unit No. 13 is in the PROG. mode.
R907D Unit No. 14 Turns on when unit No. 14 is in the RUN mode.
Turns off when unit No. 14 is in the PROG. mode.
R907E Unit No. 15 Turns on when unit No. 15 is in the RUN mode.
Turns off when unit No. 15 is in the PROG. mode.
R907F Unit No. 16 Turns on when unit No. 16 is in the RUN mode.
Turns off when unit No. 16 is in the PROG. mode.