Do you have a question about the Nakamichi 600II and is the answer not in the manual?
power source voltage | 100, 120, 220, or 240 V |
---|---|
power source frequency | 50/60 Hz |
power consumption | 15 W Max |
tape speed | 1-7/8 ips (4.8 cm/sec) |
---|---|
wow and flutter | Less than 0.12% WTD Peak |
frequency response | 35-20, 000 Hz +3 dB |
signal to noise ratio | Better than 60 dB 400 Hz, 0 dB IHF-A WTD rms |
total harmonic distortion | Less than 1.5% 400 Hz 0 dB |
bias frequency | 105 kHz |
input sensitivity | 50 mV, 50 k ohms |
---|---|
output level | 580 mV (400 Hz, 0 dB, Output Level at Max) |
headphone output | 45 mW |
dimensions | 15.75 (W) x 6.85 (H) x 9.41 (D) inches |
---|---|
dimensions in mm | 400 (W) x 174 (H) x 239 (D) mm |
weight | 14.3 lbs (6.5 kg) |