Need help?Do you have a question about the Nakamichi LX-3 and is the answer not in the manual?
General| Number of Heads | 2 |
|---|---|
| Track System | 4-track, 2-channel stereo |
| Heads | 1 x record/playback, 1 x erase |
| Noise Reduction | Dolby B |
| Total Harmonic Distortion | 1.0% |
| Input | 50mV (line) |
| Output | 0.5V (line) |
| Type | Cassette Deck |
| Tape Type | Type I, CrO2, Metal |
| Motor | Electronic servo-controlled DC motor |
Step-by-step instructions for loading a cassette tape into the deck.
Controls for power, eject, rewind, pause, play, stop, and fast-forward functions.
Controls for initiating recording and selecting tape types (EX, SX, ZX) for optimal performance.
Controls for fine-tuning bias, equalization, Dolby NR, MPX filter, and input signal levels.
Peak level meters, master fader control for fades, and tape counter for tracking tape position.
Enables unattended recordings or playback start at a pre-selected time using an external timer.
To Next Page
