Need help?Do you have a question about the Nakamichi LX-5 and is the answer not in the manual?
Power| power source | 100, 120, 120/220-240, 220 or 240V AC; 50/60Hz |
|---|---|
| power consumption | 33 W max. |
Tape Specifications| tape speed | 1-718 ips. (4.8 cm/sec.) |
|---|---|
| frequency response | 20 Hz-20, 000 Hz |
| signal-to-noise ratio | Better than 70 dB (Dolby C-Type NR) |
Distortion and Noise| wow-and-flutter | Less than 0.1 1 Ol0 Wtd peak |
|---|---|
| total harmonic distortion | Less than 0.9% (ZX tape) |
| erasure | Better than 60 dB (1 00 Hz, 0 dB) |
Dimensions and Weight| dimensions | 450(W) x 135(H) x 307(D) millimeters |
|---|---|
| dimensions (inches) | 17-3/4(W) x 5-5/16(H) x 12-1/16(D) |
| approximate weight | 8.5 kg |
Diagram and labeling of the Nakamichi LX-5 front panel controls.
Explanations for primary controls like Power, Eject, Playback, and Tape Selection.
Explanations for secondary controls such as Monitor, Tape Counter, and Input/Output Jacks.
Instructions for connecting the deck to an amplifier and optional remote control.
To Next Page
