nama M1 - Step 5 Turn the Power Switch on

11
STEP 2
ALIGN CHAMBER SET
TO BACK OF BASE
STEP 4
PLUG THE POWER CORD
INTO THE BASE, AND
CONNECT TO POWER
STEP 5
TURN THE POWER
SWITCH ON
STEP 3
PLACE THE PITCHER
UNDER THE SPOUT
Place the chamber set onto
the base, with the spine aligned
with the back of the base.
TIP: Spout cap must be closed
before adding ingredients and
starting operation.
Base BackBase Back
M1Illustrations for placement/linked to User Manual.
Do not scale line weights.
M1Illustrations for placement/linked to User Manual.
Do not scale line weights.