14
SENSORS
STANDBY MODE
LID SAFETY
INTERLOCK
The Milk Maker will not
operate when the lid is
not properly secured on
the chamber set.
If the lid is opened any
time during operation,
the unit will automatically
stop. When the lid is
properly secured, unit
will revert back to initial
blending time.
Standby Mode is indicated
when the START/CANCEL
button is ashing slowly and
display is dark. Unit goes into
standby mode for 2 reasons:
1. After 5 minutes of inactivity.
To re-engage, press the
START/CANCEL button.
2. If both the lid and spout
cap are open. To re-engage,
close the lid or spout cap.
SPOUT OPEN/
CLOSE SENSOR
CLOSE SPOUT signals
spout must be closed
before adding ingredients
and starting operation.
OPEN SPOUT signals the
blend cycle is complete
and open the spout
to dispense milk and
automatically start the
spin cycle.
To Next Page
