15. MAKE SURE THE MOTOR STOPS COMPLETELY BEFORE DISASSEMBLING.
16. DO NOT PUT YOUR FINGERS OR OTHER OBJECTS INTO THE CHAMBER
WHILE IT IS IN OPERATION. IF FOOD BECOMES LODGED, STOP THE MILK
MAKER, UNPLUG FROM THE POWER OUTLET BEFORE DISASSEMBLING
TO REMOVE THE REMAINING FOOD.
17. KEEP HANDS AND UTENSILS OUT OF CONTAINER WHILE MILK MAKER
IS IN OPERATION TO REDUCE THE RISK OF SEVERE INJURY TO PERSONS
OR DAMAGE TO THE MILK MAKER.
18. DO NOT LEAVE FOREIGN OBJECTS, SUCH AS SPOONS, FORKS, OR KNIVES
IN THE CONTAINER AS THIS WILL DAMAGE THE BLADES AND OTHER
COMPONENTS WHEN STARTING THE MILK MAKER AND MAY CAUSE INJURY.
19. DO NOT ATTEMPT TO OPERATE WITH DAMAGED BLADES.
20. BLADES ARE SHARP. CLEAN AROUND THE BLADE ASSEMBLY WITH
EXTREME CARE TO AVOID INJURY.
21. CARE SHOULD BE TAKEN WHEN HANDLING THE SHARP CUTTING BLADES,
EMPTYING THE CONTAINER AND DURING CLEANING.
22. ILLUMINATED WORDS AND NUMBERS ON THE MOTOR BASE ASSEMBLY
INDICATES READY TO OPERATE. AVOID ANY CONTACT WITH BLADES
OR MOVING PARTS. AVOID INADVERTENT CONTACT WITH THE DIAL.
23. DO NOT USE THE APPLIANCE FOR OTHER THAN INTENDED USE.
24. DO NOT ATTEMPT TO OPERATE WITH THE FILTER REMOVED.
25. ALWAYS OPERATE MILK MAKER WITH THE LID FIRMLY IN PLACE.
26. DO NOT REMOVE THE LID WHILE THE MILK MAKER IS OPERATING. IF THE
LID IS REMOVED DURING OPERATION, THE MOTOR BASE WILL STOP AND
WILL NOT RUN UNTIL THE LID IS IN PLACE ON THE CONTAINER.
27. DO NOT FILL THE CONTAINER ABOVE THE MARKED MAXIMUM CAPACITY LINE
TO AVOID RISK OF INJURY DUE TO DAMAGE TO THE LID AND CONTAINER.
28. PROCESSING FOR LONGER PERIODS CAN CAUSE OVERHEATING. DO NOT USE
YOUR MACHINE CONTINUOUSLY FOR MORE THAN 10 CONSECUTIVE CYCLES.
29. DO NOT USE CONTAINERS PROVIDED INCLUDING LID AND ACCESSORIES
IN THE MICROWAVE.
30. ALTERATION OR MODIFICATION OF ANY PART OF THE MILK MAKER,
INCLUDING THE USE OF ANY PART OR PARTS THAT ARE NOT GENUINE
AUTHORIZED NAMAWELL PARTS, MAY CAUSE FIRE, ELECTRIC SHOCK
OR INJURY AND WILL VOID YOUR WARRANTY.
03
To Next Page
