06
•
ALWAYS WAIT UNTIL THE APPLIANCE
COMES TO A COMPLETE STOP.
WHEN REMOVING FOOD OR MIXING
INGREDIENTS, MAKE SURE TO DO SO
AFTER SEPARATING THE CONTAINER
FROM THE BASE.
•
NEVER OPERATE WITHOUT THE LID
IN PLACE.
•
WHEN THE POWER IS ON, DO NOT
REMOVE THE FOOD STUCK ON THE
WALLS OF THE CHAMBER OR MIX
THE INGREDIENTS. WHEN REMOVING
FOOD OR MIXING INGREDIENTS,
MAKE SURE TO DO SO AFTER
SEPARATING THE CHAMBER FROM
THE BASE. FOR REOPERATION,
STOP THE DEVICE COMPLETELY
BEFORE USE.
•
PLEASE BE MINDFUL OF YOUR
SAFETY WHEN INSERTING YOUR
HANDS OR KITCHEN TOOLS INTO THE
CHAMBER. ALWAYS STOP OPERATION
OF BLENDER COMPLETELY AND
SEPARATE THE CHAMBER FROM THE
BASE BEFORE INSERTING HANDS OR
KITCHEN TOOLS IN THE CHAMBER.
WARNING: BLADES ARE SHARP.
•
DO NOT ADD LIQUIDS OR INGREDIENTS
IN EXCESS OF THE MAXIMUM FILL LINE
ON THE CHAMBER.
•
DO NOT TOUCH SHARP BLADES WITH
BARE HANDS. USE A CLEANING TOOL
SUCH AS A CLEANING BRUSH TO
CLEAN THE BLADES AND BOTTOM
OF CHAMBER.
•
BLADES ARE NOT REMOVABLE
FROM THE BLADE FRAME. DO NOT
ATTEMPT TO SEPARATE THE BLADES
AS IT WILL CAUSE DAMAGE TO
THE PRODUCT.
•
BLADES CAN ROTATE AT HIGH
SPEEDS WHEN IN USE. IF THE MILK
MAKER PRODUCES SMOKE OR
EXCESSIVE HEAT TEMPERATURES,
PLEASE STOP OPERATION
IMMEDIATELY AND CONTACT
NAMA CUSTOMER SERVICE.
• DO NOT LEAVE MILK MAKER
UNATTENDED WHEN IN USE.
DO NOT BLEND HOT LIQUIDS
SAFETY PRECAUTIONS (CONTINUED)
Cautions During Operation
To Next Page
